Wellton Build Club
How to get a building permit in Wellton, AZ
Confirm the parcel with the Town, sit the pre-development meeting, then file the Building Safety Division application.

A building permit in Wellton, Arizona starts with the Town. Confirm the zoning district and the parcel number, file a Pre-Development Meeting application, and read the summary the Town emails. Then file the Building Safety Division application and line up Town water and trash, Wellton Mohawk electric, Southwest Gas, and sewer or septic. Permits and carry time are where a first build stalls. The Wellton Build Club is on a live job here with an in-house GC.
How do you confirm zoning and the parcel with the Town of Wellton?
Start with the Town of Wellton, not a map pin. Development Services is at 28634 Oakland Avenue, P.O. Box 67, Wellton, AZ 85356. The phone on the pre-development guide is (928) 785-3348.
The Pre-Development Meeting application asks for the current zoning district, the parcel number or numbers, the quarter section, and the project address or location. It also asks for the project name, associated cases, and the request. If you do not know the zoning district or the parcel number, ask Town staff. Do not guess them onto the form.
Building homes in Wellton, Arizona is place work. A lot that looks open is still a file. The building permit's official-use block has a zoning district line and a flood zone yes or no, filled on the Town side. That line is not a reason to skip the parcel check.
What do you file for a Wellton Pre-Development Meeting?
The Town publishes a Pre-Development Meeting for a property inside Wellton. The guide is from Development Services. The meeting is not itself a building permit. It is how you put the site in front of staff.
The guide lists three steps. You file a complete application. Every checklist item has to be in the submittal, and you are responsible for accuracy. Incomplete applications will not be accepted. After the application is processed, staff is assigned, a meeting date is set, and the materials are routed to Town staff for review and comment. Then you get a written summary. The guide says that summary is given no later than two working days after the meeting, and that it is emailed to the applicant.
The checklist is a completed and signed application, a project narrative (a description of the proposal), and a conceptual layout plan (a conceptual illustration of the proposal). The case type on the form is Pre-Development Meeting.
The owner may name an agent as the coordinator. That person is the applicant. The guide says the applicant receives technical comments and decision letters and passes them on. All contact for the project goes through the applicant on the form. There are also lines for a secondary applicant, the owner, a developer, an architect, and an engineer.
Keep the emailed summary. It is the Town's note after the meeting. It is not a permit and it is not a plan set.
What does the Building Safety Division application ask for?
The building permit application comes from the Town of Wellton Building Safety Division. The address on it is 28634 Oakland Avenue, P.O. Box 67, Wellton, Arizona 85356. Phone (928) 785-3348. Fax (928) 785-4374.
You mark the permit type: Building, Plumbing, Mechanical, Electrical, or Fire Sprinkler. There is also a demolition permit number line. The form asks for the project address, subdivision, and lot, and for the owner, contractor, designer or architect, and engineer.
Two site questions sit on the form. Does this address have overhead service: yes, no, or not applicable. Does this address have septic: yes, no, or not applicable. If the septic answer is no, the form asks for a county permit number and a copy.
You write the scope of work, the type of construction, and the square footage. Plumbing, electric, and mechanical subcontractors each get a block, including an Arizona license number.
The owner's declaration cites Arizona Revised Statutes 32-1121. One path is an owner who does the work themselves, with their own employees, or with licensed contractors, when the structure is only for the owner and is not for sale or for rent. The other path is an owner acting as a developer who builds for sale or for rent and contracts with a licensed general contractor or specialty contractor. That path says to complete the contractor section and list the general, mechanical, electrical, or plumbing contractors.
A licensed contractor signs under Arizona Revised Statutes 32-1169A and gives the Registrar of Contractors license number and expiration date. An authorized agent certifies the owner authorized the application and agrees to follow the laws of this jurisdiction.
If no permit is issued within 180 days after the application date, the application expires by limitation. Plans submitted for review may then be returned to the applicant or destroyed by the building official.
The form also prints Senate Bill 1598, Arizona Revised Statutes 9-835. As stated there, the Town may make only one comprehensive request for more information during the substantive review time frame. After the first plans and one resubmittal, the permit is granted or denied. A denial means a new application, new plans, and a new overall time frame. The Town and the applicant can sign the option on the form to allow more requests. Each extra resubmittal adds a time extension of twenty-five percent of the overall time frame.
Questions on the application go to Ashley Rivera, Permit Clerk, at 928-785-3348, fax 928-785-4374, or [email protected].
The Arizona permit timeline estimator is a public calculator. It is not the Town of Wellton's review clock. Ask the Building Safety Division about the file you are actually submitting.

Which utilities does a Wellton new build line up?
A Wellton new build lines up more than one provider. Water and trash are the Town of Wellton. Electric is the Wellton Mohawk Irrigation and Drainage District (WMIDD). Natural gas is Southwest Gas. Coyote Wash homes use The Links at Coyote Wash sewer. Other properties may need a septic application through Yuma County. The building permit form asks about overhead service and about septic, including a county permit number.
Names, phones, and street addresses for each of those are in utilities for a new home build in Wellton, AZ.
Where do first builds in Wellton stall?
They stall on permits and on carry time, while the lot sits and the file is still a list. The Town packet wants a zoning district, a parcel number, a narrative, a conceptual layout, a Building Safety Division application, and a septic answer that may run through Yuma County. Permits and carry eat people who only buy the lot. The walls are not what stops a first build.
The stall gets worse when the general contractor search starts after the lot is closed. On the Town form, a project built for sale or for rent is the path that names a licensed general contractor. The Wellton Build Club has an in-house GC on a live job in Wellton. Alexander & Arturo run the club. Arturo is the in-house GC. Members vote. Leaders execute.
This article is educational. It does not sell securities. It does not list a street for the live job. Unlock the live job on the Build With Me Capital home page. Name and email open the on-demand briefing. Call (520) 353-2244 if you want to talk with someone on this job.
Questions people ask
How do I get a building permit in Wellton, AZ?
Confirm the zoning district and parcel number with the Town of Wellton. File a complete Pre-Development Meeting application, with a project narrative and a conceptual layout, and read the written summary the Town emails. Then submit the Building Safety Division building permit application and line up water, trash, electric, gas, and sewer or septic. The Development Services address on the Town forms is 28634 Oakland Avenue, Wellton, AZ 85356, phone (928) 785-3348.
What do I submit for a Wellton Pre-Development Meeting?
The Town of Wellton Pre-Development Meeting checklist asks for a completed and signed application, a project narrative that describes the proposal, and a conceptual layout plan. The application also asks for the current zoning district and the parcel number or numbers. Incomplete applications are not accepted. The Town emails a written summary no later than two working days after the meeting.
Where do I apply for a Wellton building permit?
Apply with the Town of Wellton Building Safety Division, 28634 Oakland Avenue, P.O. Box 67, Wellton, Arizona 85356, phone (928) 785-3348. The permit types on the application are Building, Plumbing, Mechanical, Electrical, and Fire Sprinkler. Questions on the form go to Ashley Rivera, Permit Clerk, at that phone number or [email protected].
Who provides water, electric, gas, and sewer in Wellton, AZ?
The Town of Wellton provides water and trash, at 28634 Oakland Avenue, 928-785-3348. Electric is the Wellton Mohawk Irrigation and Drainage District, 30570 Wellton Mohawk Drive, 928-785-3351. Natural gas is Southwest Gas, 800-860-6020. Sewer listed by the Town is The Links At Coyote Wash for Coyote Wash homes, (888) 712-1120. Septic applications go to Yuma County Development Services, 2351 West 26th Street, Yuma, phone 928-817-5000.
Does every Wellton home use Town sewer?
No. The Town utilities page lists The Links At Coyote Wash sewer for Coyote Wash homes. It also says homes in Wellton may use individual septic systems, depending on the property. Septic applications, including a new system or an upgrade, go to Yuma County Development Services. The building permit application asks whether the address has septic.
Who runs the Wellton Build Club?
Alexander & Arturo run the club. Arturo is the in-house GC on the live job. Public pages do not list a street. Call (520) 353-2244, or unlock the live job briefing at buildwithmecapital.com, to see the work.